Fluval C3 Hang On Filter
The Fluval C-Series Hang-On Filters are innovative backpack aquarium filters that keep fresh and marine aquarium water crystal clear with help of the unique 5-step cleaning system. Available are three different sizes suitable for freshwater and saltwater aquariums from approx. 35 to 265 litres.
In the first stage, coarse dirt is trapped in porous foam. Further mechanical cleaning takes place in the second stage with a dense polyester layer, where fine impurities are retained. Chemical cleansing takes place in the third stage, where activated carbon filters out unwanted odours, discolouration and chemical substances such as chlorine. Subsequently, the aquarium water is cleaned biologically in stages 4 and 5. For this purpose, a bio-screen first provides a large surface for useful bacteria to settle and at the same time prevents remaining dirt particles from entering the further biological level. In the latter, the biological trickle chamber, C-bio nodes ensure that the water is enriched with oxygen, which is conducive to a rapid reduction of toxic ammonia and nitrite.
For a secure hold on the aquarium rim, the filter has a leveler. After the filter has been hung over the edge of the aquarium, the leveler is turned until the filter sits firmly and completely vertically. In order to be able to vary the flow rate, the filter has a pin on the top which can be moved continuously. Maintenance of the Clip-On backpack filter is also very easy. An indicator rod shows when the foam insert needs cleaning. The filter can be opened from the top to remove the media individually.
FEATURES
- Two Mechanical stages trap large and fine debris
- Foams easily slide out for quick cleaning
- Chemical stage with activated carbon effectively removes toxins
- Biological stage with Bio-Screen pad blocks debris and provides massive surface area for beneficial bacteria growth
- Biological Trickle Chamber for fast and efficient nitrification when loaded with Fluval C-Nodes
- Patented refiltration control system permits slower water output and increase contact time with media
- Independent filtration stage management possible at different times while maintaining continuous biological activity
- Cleaning indicator notifies when polyfoam needs rinsing
- For use in freshwater and saltwater aquariums
TECHNICAL DATA
Fluval Clip-On Filter – C2 | |
---|---|
Max. flow rate | 400 Litres per hour |
Power consumption | 5 W |
Fluval Clip-On Filter – C3 | |
---|---|
Max. flow rate | 480 Litres per hour |
Power consumption | 5 W |
Fluval Clip-On Filter – C4 | |
---|---|
Max. flow rate | 900 Litres per hour |
Power consumption | 5 W |
Reviews
There are no reviews yet.